Red Dot Mount is installed at the position of the rear sight of Winchester Model 94 and 1892 Barrel. When installing, first remove the original rear sight and replace it with an optical base. Please confirm your model before purchasing.
It will works with these below red dot sights. (Red Dot Sight Mounting Screws INCLUDED)
| Note: | Before placing an order, you should confirm the red dot sight's footprint to avoid purchasing errors. |
| Plate#1 | Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III IV, Vector-TEK |
| Plate#2 | Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty,Justice, Vector-MOJ |
| Plate#3 | C-More RTS / STS, Vortex Razor, SIG Romeo 3 MAX, XL |
| Plate#4 | Shield RMSc, RMS, Leupold DPP, Vortex Defender, JPoint, Swampfox Sentinel, SIG Romeo Zero, Vector-MAG |
| Plate#5 | Aimpoint Acro P-1 / 2, C-1 / 2, Steiner MPS |
| Plate#6 | Holosun 407K, 507K |
| Plate#7 | Holosun 509T | SCRS |
Package List:
-
1 x Mount Adapter Plate
-
1x Dovetail Plate
-
1x screw (Adapter Plate mounting screws)
-
2 x screw (Optics red dot mounting screws)
| Style | Plate1, Plate2, Plate3, Plate4, Plate5, Plate6, Plate7 |
|---|
1 review for Red Dot Mount Fit For Winchester Model 94 1892
Add a review
Related products
> Mount Adapter
Price range: $15.99 through $16.99
> Mount Adapter
(6)
Original price was: $29.99.$22.99Current price is: $22.99.
> Mount Adapter
Original price was: $29.99.$21.99Current price is: $21.99.
> Mount Adapter
(5)
Original price was: $29.99.$21.99Current price is: $21.99.
> Accessories
Price range: $8.99 through $10.99
> Mount Adapter
Red Dot Mount Plate Fit For Crossman2240，2250, 1377, 1322, 1399
(3)
Original price was: $29.99.$21.99Current price is: $21.99.
> Mount Adapter
(2)
Original price was: $29.99.$22.99Current price is: $22.99.
> Mount Adapter
(5)
Original price was: $29.99.$23.99Current price is: $23.99.
Rowland Parks (verified owner) –
I have Plate 4 and a Leupold Deltapoint Pro on a Miroku-Winchester 1892 .44 Magnum, and the same plate and red dot on a Miroku-Winchester 1886 Extra Light .45-70. The dovetail plate is a little over-sized but easily fitted with a little filing and tapped in with a brass hammer. The red dot plate fits very securely. Not sure what the extra screws are for. They don’t fit the red dot, and I just used the screws that came with the red dot. I highly recommend this plate if you want to securely mount a red dot to a Winchester in this manner.